Photo is for clarification purpose only. Actual part may vary.
95-98 Nissan 240SX Roll Cage for Drift Car racing. 1.50" X 0.095 DOM Mild steel
Main Hoop and Roof Hoop Are Wider Than most cages and hug the chassis very nice.
Interior panels must be removed
Ment to be used with factory dash bar
Windshield runners fit in between the Dash and Door
Cage Includes Diagnol & 2-Piece Crossmember For Main Hoop
And Rear Strut Tower Crossmember
Add more strength to your ER Spec Cage, Choose type of dimple plates when ordering.
Dimple Plate Dimensions: 24" x 6" x 1/8
~~THESE CAGES ARE WELD-IN, NOT BOLT IN, AND DO NOT COME PRE NOTCHED~~
We recommend these be installed by a PROFESSIONAL fabricator experienced with installing roll cages. If you have any questions regarding bar placement or fitment please contact us prior to installing the cage completely.
DOM Tensile Stength = 70,000psi
Diameter (in) 1.50
Thickness (in) 0.095
ID (in) 1.31
Cross Sect. Area (in^2) 0.42
Tensile Strength (lbs) 29,352
Weight (lb/ft) 1.426 lb