If you're looking to put a JZ engine into your FT86 chassis, this Xcessive motor mount kit will do the job from start to finish. We've made a simple yet strong and effective formed steel motor mount and included a urethane motor mount to go with it.
We have the urethane motor mounts available in two heights for 3/4" cross member clearance and 1/4" clearance depending on whether you're doing steering rack swaps or other cross member mods. Drop your motor in, check your height, and then let us know! The taller urethane mounts are standard for the 3/4" cross member clearance, so please specify if you want the lower mounts.
This Xcessive motor mount kit does not work with VVTi blocks that only have a forward mount location on the passenger side. See the third picture for the passenger side rear position that is required. Slotted brackets allow for adjustment from the front to rear for firewall clearance. If needed, you can also set the motor back a bit further if you modify the firewall. However, there is not a ton of room in the engine bay for an inline-6.
The engine and stock intake manifold will fit under the hood when the bracing is cut out, but a turbo or intake piping may be of concern with the 3/4" cross member clearance. The engine pictured was installed with 3/4" mounts for a swapped steering rack and a G-Force transmission with an Xcessive transmission adapter and no modifications to the transmission tunnel. Modifying the transmission tunnel and raising the transmission will give more hood clearance at the front of the motor.
The Xcessive motor mount kit has been highly praised by the tuning community thanks to the high-quality components and sturdy construction. This is the kind of quality you can expect from Enjuku Racing. We are always adding more products so come back often. If you have any questions, please contact us and we’ll be happy to help. Order your Xcessive JZ motor mount kit today!