The highly-engineered AAM Spec Fuel Return System - Basic is a great stepping stone for anyone who wants the reliability of a Fuel Return System on a budget. With the ability to support 450rwhp, this system is very similar to our prestigious AAM Spec Fuel Rail Return System but utilizes the factory fuel rails (the AAM Spec Fuel Rail Return System comes with two Billet Fuel Rails and converts the factory fuel flow through each rail simultaniously).
The AAM Return Fuel System - Basic for the Nissan 350Z and Infiniti G35 is a direct bolt-on kit that converts the current factory “return less” fuel system to a full return fuel system. The “return less” system in the 350Z & G35 offers minimal adjustment to the amount of fuel the engine can receive. This type of system is cheaper for the factory to manufacture and works okay in a factory naturally aspirated setup, but has several draw backs when you go to forced induction.
One negative aspect of the factory returnless system is that the factory fuel pressure regulator is installed in the fuel tank. The factory fuel pressure regulator does not allow fuel pressure adjustments and is incapable of holding consistant fuel pressure with most aftermarket fuel pumps. The factory fuel pressure regulator is also unable to add fuel pressure under boost. This system is a must have for any forced induction supercharged or turbocharged vehicle and any big shot nitrous vehicles because the AAM Spec system removes the factory regulator's control of fuel pressure and replaces the control with a vacuum/boost sensitive adjustable fuel pressure regulator. This allows you to adjust both the level of base fuel pressure and increase fuel pressure under boost.
MAJOR BENEFITS of the AAM Spec Fuel Return System - Basic:
• Adjustable base fuel pressure (35psi to 65psi) • Increases fuel pressure under boost (about one pound of fuel pressure for each pound of boost) • Increased fuel delivery reliability • Retains the full function of the factory gas tank fuel transfer system
The AAM Spec Fuel Return System - Basic is a bolt-in kit and includes billet CNC'd adapters for the factory fuel rails, –AN stainless braided fuel lines and fittings from the factory fuel rail assembly to the pressure regulator and from the pressure regulator to the fuel tank (completely pre-assembled and pressure tested to greatly decrease installation time), boost referenced fuel pressure regulator, fuel pressure gauge, and a full set of instructions with pictures for a straight forward installation. A must for any high-horsepower 350Z and G35!
Recommended Install Time: 5 hours
This product hasn't received any reviews yet. Be the first to review this product!