FiveO 750CC EV14 Fuel Injectors

Will fit stock fuel rail/intake/electrical connection.

You are puchasing a brand new and flow matched EV14 750cc fuel injectors
Priced right at $75 each.

Guaranteed usage for superstreet and racing applications.

FLOW CHART: Each set is sold with a complete flow-data chart indicating individual dynamic and static flow rates at 3, 3.5, and 4 BAR at 25%, 50% and 100% for each injector, along with dead time (latency) at 14 volts. Flow matching was done with industry-standard equipment of the highest quality. The test was performed at varying temperatures to achieve realistic results.

Our injectors are custom-milled from brand new American/German/Japanese-made fuel injector "cores" in large-quantity batches to achieve the highest quality product.
The resulting sets are all-fuels rated; including gasoline (MTBE), and E-85. The finished injectors are then flowed and inscribed with a control number. Data is recorded for each injector. They are then hermetically-sealed and placed in matched sets ready for shipping. You don't get this kind of technology from an OE injector.

No adapters, No wiring issues, no soldering.

. Manufacturer flow rates do vary slightly from set to set.

You get a custom flow matched set that will not vary more than 1% or less than 10cc across the set.

But the most important statistic is the pulsed-flow rate on this set of injectors is nearly perfect.

Injector type: EV14, saturated

Electrcial connector: Sumitomo (Denso)

750cc/min at 43.5 PSI (3 BAR)
Latency (Dead Time): 0.75 at 14 volts

Tested Resistance: 12.5 Ohms

Voltage: 8-15 Volts, Nominal 13.5 Volts

Amperage: 1.0 Amps

Pressure: Min. 36 PSI (2.5 bar), Max. 101 PSI (7 bar)

Excellent fuel atomization - Excellent linearity

Low end pulse width accurate to within 1% down to 2ms.

This Bosch injector will not require more than 1% trim

Surface finish: black composite

All 14.5 Viton O-rings Included for installation.

SPECIAL NOTE to our customers:
All orings are supplied for installation.